Expert Toilet Installation Service Mississauga and Surrounding Areas

A toilet installation is not as simple as it may seem. Poorly installed wax rings will result in slow leakages that will rot your subfloor in months before you can realize it. An inappropriate rough-in has your new toilet rocking on the floor. An unshut supply line would turn out to be an issue next time you have an emergency. It is this that makes a difference between a licensed plumber and a handyman with a wrench. With a team of over 20 years of experience in the Greater Toronto Area, installing toilets the right way at BOS Plumbing and Drains has been our specialty in the communities of Mississauga, Oakville, Hamilton, Milton, Niagara and every other community in the city. Installing a new toilet in a new bathroom addition, replacing an old unit or upgrading your new unit to a more water efficient unit, our certified crew takes care of all the steps with accuracy, attention and complete responsibility.

What's Included in a BOS Toilet Installation Service

By hiring BOS Plumbing & Drains for toilet installation, you are not just paying somebody to screw a piece of equipment to the floor. Our full-service installation will have the following:
  1. Pre-Installation Assessment: Before we handle anything we check your current rough-in distance, flange condition, level of the floor and supply line installation. This will avoid most of the common mistakes associated with the installation process. 
  2. Removal and Disposal of Old Toilets: We disconnect, remove and dispose of your old unit. There is no need to relocate it or to make a disposal. 
  3. Flange Inspection/ Repair: The toilet installation begins with the floor flange. We look at it to check the cracks, corrosion or incorrect height and remedy or change it in case of necessity prior to installation of the new toilet. 
  4. Wax Ring Setting: one of the most important procedures in the whole procedure is the proper wax ring setting. The seal should be properly laid on the first attempt, there is no second chance when it comes to subfloor water damage. 
  5. Toilet Setting & Levelling: We fit your new toilet on the wax ring, fit it correctly and make certain it sits perfectly on your floor prior to bolting it. 
  6. Supply Line Connection & Shutoff Valve Check: We established the supply line, checked your shutoff valve and changed it in case it is corroded or stiff. The working shutoff is the best friend in case of any further toilet leak repair or emergency. 
  7. Full Flush / Leak Test: We fill up our tanks, test all the connections for leakage and make sure your toilet is functioning properly to the letter before we go. 
  8.  Cleanup: Your bathroom is left in the same condition it was when we found it clean, dry and in a good state of use.

Our Plumbing services

Expert solutions for all your residential & commercial plumbing needs

 

Service Areas

We serve the Greater Toronto Area and surrounding regions with local expertise

 

Every Type of Toilet Installation We Handle

New Toilet Installation for Bathroom Renovations & Additions

Adding a bathroom? Finishing a basement? Need to renovate a powder room? Our crew would be involved in the complete new toilet installation, rough-in verification and complete installation to your drain and supply line. We collaborate with your renovation team or on our own, according to the schedule of your projects.

We install all toilet styles and configurations:

  1. Two-Piece Toilets:
    It is the most popular type of toilet used in Canadian houses. Single tank and bowl, simple to maintain, extensive supply of spares. We do toilet bowl installation and tanks mounting in all two piece installations.

  2. One-Piece Toilets:
    Sleek and low-profile and easier to clean. More difficult to install and this is why you want a team that has a great deal of experience to do it. A slip of the knife and you are handling an egg-shaped porcelain bowl even prior to its utilization.

  3. Comfort Height / ADA Toilets:
    43-48 cm (17-19 inches) seat height, which is the same height as standard chair height. Trendy among the elderly, large-house occupants and those who are mobility-challenged. Our comfort height units are installed in all the communities of GTA.

  4. Dual-Flush and Low-Flow Models:
    Current toilets have a regular flush of as little as 3-6 litres per flush as opposed to the 13+ litres used by pre-1994 models. In many cases, the toilet replacement cost is justified in a few years by the savings in the amount of water you save.

  5. Wall-Hung Toilets:
    It is important that In-wall tank systems need carrier frame, wall reinforcement, and rough in work are properly done. It is not a do it yourself project. Our professional team will properly install the wall-hung system with proper anchoring of the carrier and the in-wall tank can be easily accessed in the future for toilet tank repair or flush valve replacement.

  6. Smart Toilets and Bidet Toilets:
    Smart toilets and bidet toilets need to be plumbed and to be electrically designed. We also organize the two and also carry out standalone attach bidets to toilet seats installation on the standard units.

Compare Popular Toilet Types Before Installation

The selection of the appropriate toilet can enhance comfort, conserve water and lessen future plumbing problems. Our team assists the homeowners with choosing the best alternative depending on the size of the bathrooms, the use requirements and the budget.

Toilet TypeBest ForMain Benefits
Two-Piece ToiletMost homesAffordable, easy repairs
One-Piece ToiletModern bathroomsSleek design, easier cleaning
Comfort Height ToiletSeniors & tall usersEasier sitting and standing
Dual-Flush ToiletFamiliesWater-saving flush options
Wall-Hung ToiletLuxury or small bathroomsSpace-saving, modern style
Smart ToiletPremium upgradesBidet, heated seat, advanced features

Don’t know what model to use in your house? BOS Plumbing & Drains will be able to advise the most desirable one in the course of your new toilet installation consultation.

Toilet Replacement – When Your Old Toilet Has to Go

Not all toilets require coaxing and another repair. There are cases when it is just the correct decision and cheaper in the long-run to replace the toilet. Our group offers un-biased professional advice on which is more economical in terms of finances; repair or replacement given your circumstances.

Common reasons homeowners across the GTA choose toilet replacement:

Your washroom is continually on the run and you need to keep on calling repair toilet flush valves or flush valve replacement. Within two years you have already had a plumber for toilet repair out more than twice in two years due to various problems. Even cracking of hairline in the bowl or tank is visible in the porcelain which widens with time and results in unexpected failure. Your toilet flushes in excess of 10 litres per flush and this shows in your water bills. You are remodeling and desire it all to be new, current and warrantied.

Nevertheless, no matter what the cause is, our service of toilet replacement is fast and complete. The entire replacement, take off old and install the new, testing, and clean-up are all done in one visit.

Commode Installation: Basement Bathrooms, Secondary Suites & Commercial Spaces

Adding a commode installation to a basement bathroom or secondary suite is a more complicated process than a normal replacement of a bathroom. Depending on your drain setup, an upflush system, or ejector pump might be necessary in the basement toilets, and the rough-in might not be standard.

Your team evaluates your particular setup and suggests an approach to your team. We have done commode installations in all forms of properties GTA downtown Toronto condos to Hamilton heritage houses to the new Milton subdivisions and we are familiar with whatever you may have.

Why BOS Plumbing & Drains for Your Toilet Installation Near Me

Entering toilet installation near me in the GTA, you will find numerous choices. This is what will make BOS Plumbing and Drains the best:20+ Years of Local Experience:
We have installed toilets in all forms of homes and buildings in Southern Ontario. We are familiar with the foibles of older Niagara houses, with the cramped bathrooms of century houses in Hamilton, with basement plans typical of newer subdivisions of Milton, with rough-ins typical of condos in Mississauga and Oakville. Local knowledge matters.

Licensed & Insured Plumbers:
All installations will be done by a licensed Ontario plumber. The plumbing in your house is up to code, your installation is under warranty and your insurance is not canceled due to unlicensed work.

Fully Stocked Service Vehicles:
We bring the tools, parts and materials to accomplish most of the installations on the initial visit. No, I will have to come back with that.

Upfront, Transparent Pricing:
You will be able to determine your toilet installation cost even before we begin. The quote that we provide is what you pay.

Workmanship Guarantee:
We guarantee our installations. When something is wrong with our work we will go back and rectify it. Full stop.

Serving the Whole GTA & Southern Ontario:
Mississauga, Oakville, Hamilton, Milton, Niagara and all communities in the Greater Toronto Area. A single call will contact a team that is likely to be operating in your neighbourhood.

A Note on DIY Toilet Installation

We know how tempting it is to install a toilet yourself, hardware stores make it easy, and there is no dearth of YouTube instructions. However, the truth of the matter is, the costliest plumbing calls that we get tend to be follow-ups on DIY installations that have gone awry. An oddly shaped wax ring. A supply line which was loose, and not sealed with thread seal tape. One of the flanges that was previously broken but was not spotted until the new toilet was flushed. These are not disastrous errors at the time, but gradual, silent faults, which turn out in weeks or months to come, and can be water damage under your subfloor or a long-term toilet leak repair job with no apparent cause.

A professional toilet installation by BOS Plumbing and Drains is half the cost of subfloor remediation. It is accompanied with a workmanship guarantee. And it is done by a man who has done it a thousand times before, and it is done right the first time.

Same-Day Toilet Installation & Emergency Toilet Replacement

A broken toilet is sometimes unable to wait days before its repair. Broken bowls, incessant spillages, extreme clogging or a toilet that is no longer flushing correctly can easily disrupt your home or business. This is the reason why BOS Plumbing & Drains provide same-day toilet installation and emergency replacement services throughout the GTA as long as the time permits it.

Our plumbers are licensed and come with the tools to remove the failing units, examine the flange and shutoff valve, and accomplish numerous replacements within a visit. It could be that your toilet just broke down, or you may need to upgrade your toilet before your guests walk in the door, we are prepared to assist you.

Common Reasons for Emergency Toilet Replacement:

  • Cracked toilet bowl or tank
  • Severe leak causing floor damage
  • Toilet overflowing repeatedly
  • Toilet not flushing at all
  • Old toilet failed beyond repair
  • Loose rocking toilet with leaking base
  • Repeated clogging issues
  • Renovation deadlines requiring urgent install

Require fast toilet installation near me? Our main location is the prompt professional service of Mississauga, Oakville, Hamilton, Milton and Niagara Region.

How much does toilet installation cost in Ontario?

Toilet installation cost
in Ontario varies based on several factors: the type of toilet being installed (standard two-piece vs. wall-hung vs. smart toilet), whether flange repair is needed, whether your existing shutoff valve needs replacement, and whether old toilet removal and disposal is included.

As a general reference point for the GTA market, standard toilet replacement cost for a basic two-piece unit in good rough-in condition typically falls in a predictable range and BOS Plumbing provides you with a clear, itemized quote before any work begins. No surprise line items. No charges that weren’t discussed. What we quote is what you pay.

The best way to get an accurate toilet installation cost for your specific situation is to call us for a quick assessment. We’d rather give you a real number than a vague range that sets the wrong expectation.

Book Your Toilet Installation Today

You may have a simple toilet replacement that is required, a complete new toilet installation in a new bathroom addition, a complex wall-hung system, a commode installation in your basement, or you may wish to attach bidet to toilet on the one you already haveBOS Plumbing & Drains know how to do it.

Mississauga, Oakville, Hamilton, Milton and Niagara: 20+ years of licensed plumbing experience with every job in the GTA.

    GET A PLUMBER NOW





    FAQs

    A standard new toilet installation removing the old toilet, inspecting the flange, setting the wax ring, installing and levelling the new toilet, connecting the supply line, and testing typically takes between 1 and 2 hours for an experienced plumber. More complex situations like flange repair, shutoff valve replacement, or wall-hung installations take longer. We’ll give you a realistic time estimate when we quote the job.

    Either works. If you’ve already purchased a toilet, we’ll install it. We’ll just confirm the rough-in distance and flange compatibility before we arrive. If you’d prefer us to supply the unit, we work with trusted suppliers and can recommend models that suit your bathroom dimensions, usage needs, and budget. We’re brand-agnosticour job is to install whatever you choose, correctly.

    Sometimes, yes. A toilet that clogs repeatedly despite normal use often signals a partial obstruction in the trap or drain line that a clogged toilet fix or plumber for clogged toilet visit can resolve. But in older toilets, chronic clogging can also indicate a low-flow design that simply doesn’t generate enough flush force for modern usage patterns. If you’re constantly reaching for the plunger or calling a plumber for clogged toilets more than twice a year, a toilet replacement with a modern, high-efficiency model might genuinely solve the problem.

    The rough-in is the distance from the finished wall behind your toilet to the centre of the floor drain (the flange). Standard rough-in in Canadian homes is 12 inches, but 10-inch and 14-inch rough-ins exist particularly in older homes across Hamilton, Niagara, and the GTA’s heritage neighbourhoods. If you buy a toilet before measuring your rough-in, you may end up with a unit that doesn’t fit your space. Our team measures before every installation and before recommending any specific model.

    A damaged, corroded, or improperly positioned flange is one of the most common complications we encounter during toilet installation jobs particularly in homes 30+ years old. A flange that sits below the finished floor level won’t allow the wax ring to seal correctly, which means toilet leak repair calls in your future. We repair or replace damaged flanges as part of our installation service, and we always inspect before setting anything. This step is what separates a proper installation from one that fails quietly over 6–12 months.

    In most cases, yes. Water pooling at the base of a toilet after flushing almost always points to a failed wax ring. The fix involves removing the toilet, scraping the old wax, inspecting the flange, and replacing the wax ring on the toilet before reinstalling. It’s not glamorous work, but it’s critical because a leaking wax ring causes subfloor water damage that can cost significantly more to repair than the original plumbing call. Don’t wait on this one.

    Toilet tank repair replacing the fill valve, flapper, flush valve replacement, float, or repair toilet flush valve is usually the right call when the tank components fail but the bowl and tank themselves are structurally sound. Tank components are relatively inexpensive and wear out over time regardless of toilet brand or quality. However, if the tank itself is cracked, or if tank repairs have been needed multiple times in a short period, a full toilet replacement is typically the more economical long-term decision. Our plumber toilet repair team gives you an honest read on this.